My London Tradesmen

If you have moved into a new home and are in need of a Fitting a Gas Cooker in E15 Stratford, East London, then do not ask an under-qualified or semi-qualified engineers to carry out your gas appliance job. Gas Safe replaced the CORGI, and only engineers who are registered under Gas Safe are legally up-to-date and able to fit a gas cooker in your E15 Stratford, East London home. Typically, a connection is fitted from the cooker to the gas supply using a flexible gas hose pipe. In addition, a stability chain will connect the rear of the gas cooker to the wall to prevent leaking if the appliance is pulled out. The final stage before the fitting is complete is checking that the seal on the bayonet is tightened securely to prevent gas escaping. The engineer is entitled to check this.

The regulations for Fitting a Gas Cooker in E15 Stratford, East London with a high level grill tend to stand at a minimum of 610mm clearance above the grill, with a minimum of 20mm for each side of the appliance. Your E15 Stratford, East London kitchen should have enough space to accommodate the fitting of the new gas cooker, so this should be checked beforehand. Any appliance installed in specific buildings (e.g. flats above shops or multi-dwelling buildings) must have a Flame Supervision Device. The purpose of this is to detect if the flame is extinguished and that it cuts off the gas supply. Stand-alone gas-only cookers do not have this enabled because they have no electric supply.

If you are an individual looking for Fitting a Gas Cooker in E15 Stratford, East London for your property please submit your desired job on My London Tradesmen and you will receive up to three quotes from three different companies best suited to your requirements. All tradesmen that are suggested to you are trustworthy, receive up-to-date training and are registered with all the necessary bodies. The steps to take are simple, in order to ensure a smooth fitting of your new gas cooker in your E15 Stratford, East London home.