Starting to Install a Hob
When starting to Install a Hob, it is crucial that the task is carried out by a certified Gas Safe engineer, who afterwards will then issue a Gas Safety Certificate (CP12). This documentation is a legal requirement, as it shows that the hob has been safely tested for gas leaks and other defects after installation. An installed hob is unique to that of a freestanding gas cooker, due to the fact that it cannot simply be plugged into the gas supply. In addition, starting to Install a Hob as a replacement, rather than a first time installation, is less time-consuming; however both processes are intricate and require the right skills of a professional.
Unlike a freestanding cooker, when starting to Install a hob, you begin by switching off the mains before connecting solid copper pipes from the gas supply valve to the hob itself and soldering them into place. A flexi hose should never be used, as a more secure connection is required for when the appliance ever needs to be moved for cleaning purposes etc. The space around a hob must be closely considered for the installation, whilst bearing in mind the specific regulations to follow. A minimum of a 750mm clearance is required above the hob to the cooker hood. Any units installed either side of the hood must be at least 366mm above. A 300mm further clearance is required either side of the hob, if it is being installed next to flammable material, such as wood.
Starting to Install a Hob is difficult and only a gas safe registered engineer can carry out such a task, please submit your desired job on My London Tradesmen and you will receive up to three quotes from three different companies best suited to your requirements. All tradesmen that are suggested to you are trustworthy, receive up-to-date training and are registered with all the necessary bodies. The steps to take are simple, in order for your new hob to be installed into your home.